Anti- Islanding Protect solar micro grid tie inverter with Full load and Aluminum case

Product Description:

SVC1200 Series Using IP65 waterproof streamline design, Can effectively prevent rainwater on the surface erosion, Built-in high-performance Maximum Power Point Tracking(MPPT)Function,Better able to track changes in the solar luminosity and control different output power, Effectively capture and collect sunlight. AC electric power transmission using the reverse transmission technology, Is one of our patented technology, The inverter output power can provide load priority use, Extra electricity to the grid, Efficient use of the inverter to the power emitted, Electricity transmission rate of up to 99%.

System Function:

Power line carrier-current communication(this is optional function,please confirm the spec outside the box first .)

By using electric power as a carrier of AC alternating current, can modulate high-frequency and carrier frequency (60KHz) in AC wire transmission and can achieve the communication/ newsletter between inverters or between inverter and computer. And it can transfer the power data . Also monitor all functions of inverter.

1.Carrier frequency 60KHZ(Frequency customizable);

2 Interface way TTL level serial interface; 3.Carrier rate 300BPS;
4.Serial rate 9600PS(Can customize according to customer's request);
5 Modulation mode FSK+DSSS;

6.Newsletter distance:400m;

6-grade power search---In overcast weather, the PV Panel’s output current is extremely tiny, then inverter will automatic open 6-grade power search function,and keep outputing efficent and steady during the low power .

Wide voltage input(22-50VDC)---1.DC voltage input:22~50VDC; 2.Second level power variable voltage conversion.

High-frequency two-way and one-way grid function---1.High frequency direct modulation, AC half wave synthesis; 2.Two-way grid means: Load consume directly. And can reverse AC current transmission

Kinds of frequency output function---1.It can apply to 50Hz and 60Hz frequency of AC; 2.Frequency range: 45Hz ~ 64Hz;

AC 0 angle with high precision auto-detection---High-precision analysing the AC phase angle .The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.

1.AC phase shift: < 1%; 2.Over-zero protection: 0.2 VAC; 3.AC switching: 50Hz / 60Hz.

Maximum Power Point Tracking (MPPT)---high-precision (MPPT) operation power, automatic and immediate adjust the solar panels output power at the maximum output point,made the inverter discharge to power grid with the highest efficiency

In order to achieve higher power, we can use this inverter in stack. For example: 10 pcs of SVC1200 grid tie inverter used in stack can achieve 12000W. And the stacking number is unlimited.

LED Display:

1.Red light 3 second---Red LED light 3 second while device starts , then in working condition;
2.Green flash fast---MPPT searching;
3.Green flash slow---MPPT + searching;
4. Red flash slow---MPPT - searching;
5.Green lights on 3s and off 0.5s---MPPT locked;
6.Red light steady---a. Islanding protection;b.Over-temperature protection;c.Over / low AC voltage protection;d. Over / low DC voltage protection; e.Fault

Installation Of Micro Inver ter:

Step1:Installation for fixed the inverter on the PV holder with the screws attached

Step2 Connect the two DC terminal of the PV to the inverter, positive to positive, negative to negative.

Step3 Open the waterproof cap on AC output side of the micro inverter, then plug to AC power line.

Step4 Plug the AC output line to main AC cable;

Step5 Repeat the first step to the third step to complete the installation of micro inverters;

Step6 Finally, please connect the AC main cable to the utility grid to run renewable energy and saving $$$!